Driving a car is fun. But at times, cars are faced with some issues that are annoying even to the driver. You may be driving your car and suddenly hear a loud metal scraping sound. Such a sound is hard to detect and you need to visit the mechanic to figure it out. A metal scraping sound might be caused by a number of things such as a worn-out brake pad, a bent brake splash shield, a loose wheel bearing, or also a peculiar item or debris getting stuck in the brakes. When you hear such a sound, you should tackle it quickly so that it doesn’t put your life in jeopardy.
Worn out brake pads
When your brake pads are worn out, there is a piece of metal that rides on the rotor. This metal makes a loud metal scraping noise that is very uncomfortable. In such a case, you will be required to replace these worn out brake pads with new ones so that the metal scraping doesn’t come in contact with the rotor thus leading to the disgusting noise. Visit your mechanic and ensure you replace the brake pads with quality new ones.
Inferior brake pads
Also, another common cause of a metal scraping sound may be as a result of inferior brake pads installed on your car. Cheap brake pads usually have huge metal flakes in the brake material that drags along the rotor resulting in noise. This noise might disappear when the brake pads wear away. Another thing is to ensure that you visit a professional mechanic to properly fix the brake pads.
The bent brake splash shield
Also, a bent brake splash shield on one of the brakes may cause a scraping sound to be heard. This is because the bent brake splash shield may be up against the brake rotor as you drive your car. So, when you pull away, they come into contact making the metal scraping noise. In case you hear such a noisy sound, don’t ignore it and see your mechanic right away for repair works.
Rotors rusting overnight
In some situations, the metal scraping noise can be caused by rust overnight. This is mostly the case with cars that are parked outside. Rust normally builds on the rotor around the impression of the pad. When you drive your car in the morning, you might hear this strange sound. All you need to do is to make the necessary repair by removing the rust on your rotors. If the pads are of low quality, change them with quality ones so that they don’t trust easily.
Loose wheel bearing
Another situation that might cause the scarping sound is a loose wheel bearing. A loose wheel may allow the brake rotor to scrape against the caliper bracket when the wheels are turned to one side. Go to a mechanic for them to service and repair your car for smooth and safe driving.
An item stuck in the brakes
Finally, another metal scraping noise may be heard and it may not be necessarily caused by the brakes but the rotors. If a metal or debris is stuck and is drug across a small plate, you will hear a scraping noise. This is an indication that the item is stuck between the backing plate and rotor. This usually happens when you drive on a road with a lot of pebbles or other items. Get the mechanic to look at the car and remove the debris or metal for a smooth driving of your car.
For you to drive safely at all times, you need to take good care of your car. Every time you hear a strange noise such as the one we’ve discussed above, you should see a mechanic identify the problem before you find yourself in big trouble. As discussed in detail above, a metal scraping sound may be a result of worn-out brake pads, loose wheel bearings, a bent brake splash shield, and metal or items stuck in the brakes. All of these issues can be handled by seeing a mechanic who will inspect and make the necessary repairs to your car.